Global Polytec Ltd.,Part.

Posts Tagged ‘please’

Question by Cynthia: Accounting questions. Please help.?
Question 1.
Montego Co. identifies the following activities that pertain to manufacturing overhead: materials handling, machine setups, factory machine maintenance, factory supervision, and quality control. For each activity, identify an appropriate cost driver.

A. Material hadling
B. Machine setup
C. Factory machine maintenance
D. Factory supervision
E. Quality control

*This is what I think the answers are:
A. Machine hours used
B. Number of setups
C. machine hours used
D. Direct hours used
E. ?

Question 2.
Quick Pix is a large film developing and processing center that serves 130 outlets in grocery stores, service stations, camera and photo shops, and drug stores in 16 nearby towns. Quick Pix operates 24 hours a day, 6 days a week. Classify each of the following activity costs of Quick Pix as either unit-level, batch-level, product-level, or facility-level. (The answer may include more than one level.)

A. Color printing materials
B. Photocopy paper
C. Depreciation of machinery
D. Setups for enlargements
E. Supervisor’s salary
F. Ordering materials
G. Pickup and delivery
H. Commission to dealers
I. Insurance on building
J. Loading developing machines

*This is what I think the answers are for Question 2.
A. Batch or Product-Level Activity
B. Batch or Product-Level Activity
C. Facility-Level Activity
D. Batch-Level Activity
E. Facility-Level Activity
F. Batch of Facility-Level Activity
G. Unit-Level Activity
H. ?
I. Facility-Level Activity
J. ?

Question 3.
Tool Time, Inc. operates 20 injection molding machines in the production of tool boxes of four different sizes, named the Apprentice, the Handyman, the Journeyman, and the Professional. Classify each of the following costs as unit-level, batch-level, product-level, or facility-level.

A. Depreciation on injection molding machines (I know its not facility or batch)
B. Changing dies on machines (I know its not unit or product)
C. Moving components to assembly department (I know its not unit or product)

Question 4.
Activity-based costing is most appropriate to use when labor costs are a ___________ proportion of total product costs and the manufacturing process is __________.
A. decreasing, complex.
B. increasing, complex.
C. small, uncomplicated.
D. large, uncomplicated.

*I really thought it was B but I got it wrong, then I thought it was d, but I still got it wrong. Now i’m confused.

Question 5.
Which of the following statements is false concerning the use of ABC in service industries?

A. In most service industries, a large portion of overhead costs are company-wide costs.
B. The notion regarding eliminating as many non-value-added activities as possible applies equally to manufacturers and service providers.
C. When using ABC for service industries, special methods must be used to identify cost pools and cost drivers due to the unique nature of the services offered.
D. All of the statements are true concerning the use of ABC in service industries.

Question 6.
Which of the following is a limitation of activity-based costing?

A. It does not lead to better management decisions.
B. It can only be used to improve product costing.
C.Only manufacturing companies can use it.
D. Arbitrary allocations of overhead costs may continue.

Best answer:

Answer by JKRB
(1) I don’t know if this is one of your options, but I believe that “units produced” should be the answer for (E) Quality control and possibly (A).
(2) (3) Sorry, I can’t be any help with these two.
(4) I believe this question wasn’t clear (I’ve found it happens a lot). I think it was supposed to have read “Activity-based costing is most appropriate to use when DIRECT labor costs are a ?. In which case, the answer would be (A).
(5) I’m not sure about (A), but both B and C are true. This would mean that (D) is correct.
(6) A, B, and C, are all false, so (D) is correct

Good luck

Give your answer to this question below!

Question by Max: Probability. Please help!?
An injection molding process leaves an average of 1.3 defects per bumper. Let Y and Z be the next two bumpers produced. Use an appropriate prob. function to evaluate:
a.)P[Y=2]
b.)P[Y>=1]
c.)sqr(Var Y)
d.)P[Y+Z>=2]

The problem does NOT say that it follows a normal distribution. This is quite literally all it gives. I’m assuming that this problem has something to do with the probability of 2 independent factors–I’ve looked at the section they are from but can’t find a thing. There are solutions if you have a standard deviation, but there wasn’t one given so I don’t know how to go about these. I have a normal distribution approx. table but I’m not sure if I can use it, or even how in this situation.

Best answer:

Answer by M3
the poisson distribution will be appropriate here. the formula is

P[x] = e^-m * m^x / x!

qa
m = 1.3, x = 2
P[2] = e^-1.3 * 1.3^2 /2!
= .2303
————

qb
P[>=1] = 1 – P[0] = 1 – e^-1.3 * 1.3^0 /0!
= .7275
———–

qc
variance of a posson distribution = m
sqrt(variance Y) = sqrt(1.3)
= 1,14
———

qd
for [Y+Z] , m = 2.6
applying the formula,
P[>=2] = 1 – { P[0] + P[1] }
= 1 – { e^-2.6 + e^-2.6*2.6/1! }
= .7326
———–

What do you think? Answer below!

Question by radha k: please let me know the process of recycling of EVA waste produced from injection moulding machines. as i have
know detailed process of recycling of EVA waste.

Best answer:

Answer by odysseus1959
I don’t understand your question.

At Flexible Products Corp. we have started to sell(?) our vulcanized urethane waste/runners to a recycler.

Even if we just gave it them, its better than the land fill.

Give your answer to this question below!

Question by kelz: Statistics and Probability….Help Please???
Two different types of injection-molding machines are used to form plastic parts. A part is considered defective if it has excessive shrinkage or is discolored. Two random samples, each of size 300, are selected, and 16 are defective parts are found in the sample from machine 1 while 8 defective parts are found in the sample from machine 2. Is it reasonable to conclude that both machines produce the same fraction of defective parts?

(a) Is it reasonable to conclude that both machines produce the same fraction of defective parts? Use alpha 0.05

(b) Construct a 95% confidence interval on the difference in the two fractions defective.

Best answer:

Answer by Blah
Construct the confidence interval in part b first. If the difference in proportion defective lies outside the interval, then it is NOT reasonable to conclude that they are the same.

To construct the confidence interval:
Calculate the proportion defective and standard deviation (using the binomial formula for stdev) for each machine.

Calculate the difference in proportion defective. Then calculate the standard deviation of the difference by taking the square root of the sum of the individual standard deviations squared. I.e. S_diff = sqrt (s1^2+s2^2).

The Z-value (switching to the normal distribution) corresponding to .475 (half of 95%) is 1.96 (memorize this number — you will use it often). The confidence interval of the difference about a mean of 0 (we’re interested in whether they defect rate is the same — meaning that the difference is zero) is between -1.96*S_diff (rounded to the nearest integer) and +1.96*S_diff (rounded to the nearest integer).

Know better? Leave your own answer in the comments!

Question by abhayparakh@ymail.com: Please list the variour trade , business , sites in India?
Could you please tell more trade or business 2 business sites , like yellow pages , trade directories , govt lists etc..
where companies are listed and business can be found , or register self to get business , even for smaller companies..
Please take some time giving the best , preferably free..

India Relevant Sites ,

Eg. tradeindia.com , indiamart.com , indiayellowpages.com , exportersindia.com plastemart.com , aipma.com

additionally plastic trade , job work on injection molding machines , outsourcing , – india related , sites etc

Its Important , Regards , Thanks.

Best answer:

Answer by hag_net
Search on Yahoo or Google for:
” List your business free India”.
You will get a huge list of mostly free sites.

Good luck.
I listed my sites also:
http://www.miamimovermoving.com
http://www.elalmoving.com
http://www.elalmovers.com

Know better? Leave your own answer in the comments!

Question by shepdawg5000: nose bleeds (please read details before answering)?
I have had nose bleeds since I was about 6 years old. It always seems to happen at the change of the seasons when I get them. Sometimes, I have it where they last a minute, other times they can last up to half an hour. I know how to stop them when I get them, but I would like to know a permenant solution to prevent them altogether weather that be surgery (as a last resort) or preferably some natural solution. Also, I do not take multi-vitamins(yet) and I have a humifier on when I am at home. It seems I get a nose bleed once I leave my house and when I am at work (I work in a plastic injection molding plant). Whenever there is reduced humidity, my whole body gets dry and fells like my body is dehydrated even though I drink about a gallon of water a day, not including the two glasses of o.j. and glass of milk or two. Please help!

Best answer:

Answer by mlgable
Your nosebleeds seem to be from the dry air since you state they are seasonal mostly. Use a humidifier in every room in your house/apartement and use vaseline aka petroleum jelly in your nostrils several times a day to help keep them moist. Keep a small tube in your pocket to use at work since the air is probably dry there too. You do need to get on a good multivitamin and a good antioxidant supplement to keep your immune system healthy.

Know better? Leave your own answer in the comments!

Question by roshan.gallage: Could you please tell me the advantages of Two-step injection molding machines used for thermo plastics. ?
Dear all,

I need to know the advantages of two-step injection molding machines used for thermo plastics

Thank you all in advance…

Best answer:

Answer by Bob R
You can make more complex products. You can also make separate compartments on the same product.

Know better? Leave your own answer in the comments!

Question by mystictigress31200@sbcglobal.net: can some one please direct me to a list of injection molding plastic manufacturers in Texas? I need a list?
I need a list of all plastic companies in Texas

Best answer:

Answer by love_2b_curious
Try “Hoover’s Online” directory.

What do you think? Answer below!