Global Polytec Ltd.,Part.

Posts Tagged ‘moulding’

Costruzione macchine iniezione-soffiaggio e stampi per la produzione di vasetti / bottiglie in plastica. Manufacturing of injection-blow moulding and moulds for the production of plastic jars / bottles. Procrea srl Via Leonardo da Vinci , n°12/14 24060 Carobbio degli Angeli ( Bergamo ) – Italy Telefono (++39) 035.951.307 Telefax (++39) 035.953.377 Sito : www.procrea.it E-mail : info@procrea.it

Call Applied Machinery on 03 9706 8066 for more information and to arrange a demonstration at your convenience. ====== INJECTION UNIT – Screw diameter mm 20/22/25 – Shot weight (PS) gms 26/31/40 – Screw LD ratio 21/19/17 – Injection pressure MPa 207/171/133 – Screw stroke 90mm – Screw speed 0-215 RPM – Nozzle stroke 150 mm CLAMP UNIT – Hydraulic clamp – Mould clamp force 200 KN – Opening stroke 250mm – Between Bars 250 x 220 (HXV) – Mould thickness 150-250mm – Max daylight 400mm – Hydraulic ejector stroke 60mm POWER/HEATING UNIT – Systems pressure 17.5MPa – Pump motor 5.5 KW – Heating capacity 3.5 KW – Temperature control zones 3

Injection moulding and lining of Nestle Coffee caps, 2nd part moulding and closing of syrup caps

8 beverages. from takuma
Video Rating: 0 / 5

Autodesk Inventor Tooling software automates key aspects of the design of injection molds for plastic parts, helping you to quickly create and validate complete mold designs. Learn more about Autodesk Inventor 2011: www.autodesk.com
Video Rating: 0 / 5

Really cool rapid injection moulding Demo Mold clip
Video Rating: 5 / 5

Question by jasmine: applying for correctional officer , got no background, worked as supervisor in moulding company got redundant?
worked in plastic injection moulding as supervisor for more then 10 yrs

Best answer:

Answer by Big Dog
What is your question? What information are you looking for?

Know better? Leave your own answer in the comments!

Anokmould is a professional mold manufacturer, specialized in mold making and plastic products production. 1). Mold includes: Injection Molds + die casting mold + Blowing mold + Rubber mold + Mould Inserts 2). Plastic products includes Medical / Electronical equipment, Automotive parts , household appliances,Telecom devices, General usage. Pls refer to www.anokmould.com for detailed products pictures.

Question by cool: injection moulding – will this work?
I was thinking using a 7 bar compressor line to pressurise a 100cm dia vessel containing molten plastic(using 165deg hot oil jacket for eg :PP material) and using a valve arrangement to discharge the molten plastic inside a mould which is primirarily evacuated using a vacum pump driven by the compressed air itself .
Further addition of resin inside the chamber is acheived by forcing raw material using piston driven by air at higher pressure.

My calculations says there would be a 55Ton of force applied to the plastic inside the vessel. And since the mould is in vaccuum there is no possibility for any air locks.

Will this system work like a normal 50 Ton injection moulding machine ? (or) will it be impracticable a solution ?

Best answer:

Answer by Mr.Karachi
Well it is not clear the term valve, b/c valve type should be such no blockage taken place at that point. check out similar arrangement there should be needle valve is good.

It will work

Add your own answer in the comments!

Are you looking for the possibility to produce better plastic products with injection moulding within a shorter cycle time? Do you need as mould maker the right steel to satisfy your challenging requirements? Are process quality, cost saving, and innovation fundamental in your daily business? You will probably find interesting hints in this video about the EOS e-Manufacturing solution for tooling and injection moulding.

Question by dfs raj: Do you anyone who conduct a training (teach) on Plastic Injection Moulding?
I am seeking a trainer who has the expertise to teach a group of machinists and technicians on Plastic Injection Moulding? If you are one or if you know someone in Malaysia or Singapore please email me the details.

Best answer:

Answer by acidcrap
One place you might group you might want to check with is John Klees Enterprise Inc. If their not able to help you they might be able to steer you in the right direction.

I’ve been to a few different training seminars with Klees and Bozzelli they both are great instructors. Their not just a corporate slaes person just pushing you towards a product their selling like say the crew at RJG or so many other injection molding seminars I have gone to in the past 20 years.

Know better? Leave your own answer in the comments!

6 axis robot on 2 shot moulding, checking work with video and then packaging the parts on layers.
Video Rating: 5 / 5

Slide shows you various cleaning techniques to properly clean your plastic injection molding machine molds and tool steels. Using different cleaners and techniques, both while the mold is still in the machine, and when it is removed from the machine, Slide shows you how to effectively clean and protect your mold.