Global Polytec Ltd.,Part.

Posts Tagged ‘Mold’

Injection tooling – Customer design service. – Prototyping. – Mold making. – Manufacturing process control. – Mold flow analysis service available ! – Reverse engineering. – Customer molding & assembly. – Cold runner mold and hot runner mold (MoldMaster, Incoe, Masterflow, LKM,…
Video Rating: 0 / 5

AHIMSA INDUSTRIES PVT LTD is manufacturer & exporter of thin wall pail mold, food container mould, thin wall mould, thin wall pail injection mold, injection blow mold, plastic injection blow moulding machine, injection blow molding process, pet blow moulding process, injection blow molding…
Video Rating: 0 / 5

IMD – Hy.tech Forming Systems manufactures a range of forming equipment for In Mold Decoration (IMD) applications and provides a full turn key solution for tool design, manufacture and production. The IMD process involves screenprint, forming and trimming of thin film plastics prior to injection molding. With facilities in Phoenix (USA) Newbury (UK) and Singapore – Hy.tech is well positioned to support customers working at all levels of IMD projects. Contact details: Hy.tech Forming Systems (USA) Inc – www.hytechusa.com \ sales@hytechusa.com Hy.tech Forming Systems (Euro) Ltd – www.hytecheuro.co.uk \ sales@hytecheuro.co.uk Hy.tech Forming Systems (Asia) Inc – www.hytechasia.com.sg \ info@hytechasia.com.sg Please contact your local Hy.tech facility for furhter information.

This comprehensive 9-part course was created with help from many of the world’s leading tool manufacturers and suppliers and is intended for tool designers, mold makers, engineers, part designers, and anyone involved in the tool procurement process. The Mold Design and Moldmaking Series familiarizes participants with the different types of injection molds, contemporary machining methods, and many of the available mold components. This course also provides the participant with a tool design methodology and a sample mold specification guide for reference. A. Routsis Associates – Complete Training Solutions for the Plastics Industry. Visit www.traininteractive.com for state-of-art plastics training, including interactive CD-ROM and online training.
Video Rating: 5 / 5

Mike Groleau of RJG, describes why–despite their challenges within Injection Molding–Design of Experiments (DOE) can be a valuable tool for centering a process, particularly for medical molding applications.
Video Rating: 5 / 5

This program details procedures for proper mold care before, during, and after a production run – stressing important safety considerations for mold handling. From mold storage to part removal, this course provides participants with good mold maintenance habits and aims to extend tool life & increase its productivity. Proper mold maintenance Mold storage and preparation Water line maintenance Techniques for extending tool life
Video Rating: 5 / 5

This is a CAD model that show you the main elements involved in the injection molding process. I really hope that help you to figure out better how it works…. regards. Note: this video has been posted only for educational purposes.

This two part program covers the die-setting process from start to finish with an emphasis on safety. Proper procedures for mold inspection, preparation and installation are outlined. Injection Mold Setup also covers setup procedures for hydraulic, toggle and hydro-mechanical clamp systems. Proper mold installation procedures Important safety considerations Proper water line set-up Safety precautions for mold setup
Video Rating: 5 / 5

Question by Will: What is the typical time for a mold to open/close in an injection molding process?
The mold is relatively small. It is only a 3 or 4 inch cube. Even a rough estimate will be fine. I’m looking for the time it takes the mold to open. And the time it would take to eject a simple part would be great too. I’m assuming it’s only a couple seconds but any help would be much appreciated. Thanks!
I don’t have the machine. This is for a school project.
I don’t have an injection molding machine. This is for a school project.

Best answer:

Answer by Sexy Homer is back!
Why not just power it up and time it for yourself?

The specifications sheet that came with the device should tell you.

Know better? Leave your own answer in the comments!

How to make a Fiberglass resin Senko worm mold for fishin’. Start to finish with 6 slots for pouring melted down senko worms or any old soft plastic lure you don’t use anymore.
Video Rating: 5 / 5

Metro Mold & Design provides custom plastics injection molding, thermoset plastic molding, extrusion blow molding and precision CNC machining to a wide range of industries both nationally and internationally. We serve a variety of clients, from small companies just starting up, to major corporations with established histories. We can manufacture a single mold or component as a deliverable, or we can provide complete product development and manufacturing with assembly and finishing services. Metro Mold & Design has a solution for your general manufacturing needs, no matter what the project requires.
Video Rating: 0 / 5

www.ledcoollights.com

The Dual Colour Injection Moulding Machine
Video Rating: 0 / 5