Global Polytec Ltd.,Part.

Posts Tagged ‘machine’

Call Applied Machinery on 03 9706 8066 for more information and to arrange a demonstration at your convenience. ====== INJECTION UNIT – Screw diameter mm 20/22/25 – Shot weight (PS) gms 26/31/40 – Screw LD ratio 21/19/17 – Injection pressure MPa 207/171/133 – Screw stroke 90mm – Screw speed 0-215 RPM – Nozzle stroke 150 mm CLAMP UNIT – Hydraulic clamp – Mould clamp force 200 KN – Opening stroke 250mm – Between Bars 250 x 220 (HXV) – Mould thickness 150-250mm – Max daylight 400mm – Hydraulic ejector stroke 60mm POWER/HEATING UNIT – Systems pressure 17.5MPa – Pump motor 5.5 KW – Heating capacity 3.5 KW – Temperature control zones 3

Injection moulding and lining of Nestle Coffee caps, 2nd part moulding and closing of syrup caps

At the Fakuma 2008 the STORK S+ 2000-1450 injection molding machine was producing a flowetpot inclusive fast take-out system in a cycletime of 3.0 seconds
Video Rating: 0 / 5

We offer: JSW (Japan) 400 ton Injection Molding machine Model: J400 S Year: 1984 Machine is in a good condition Best regards, Amir Greenbaum LAG Industries,Inc. 5699 Kanan Rd.#135 Agoura Hills, CA 91301 Tel: + 1 818 441 8941 Fax: +1 818 597 1284 Email: info@amiron.com Website: www.amiron.com

www.komtes.com Tel +34 902 88 51 11 The Komtes Group is the leading Spanish manufacturer of fire protection equipment and systems. Our objective is to safeguard lives and property against fire, through the research, development and manufacture of the best solutions for protection against each individual risk. The Komtes Group comprises a number of specific divisions, which are made up of diverse companies specialising in different solutions in the fight against fire, such as protection, automatic fire suppression, electronic detection, automatic fire protection and passive protection… Our equipment and systems have been installed in many prestigious international locations, such as the Petronas Towers of Malaysia, the Olympic Ring in Athens and the tallest skyscraper in Moscow, The Federal Tower. The Komtes Group comprises of more than 10 commercial offices which are located over three continents and annually exhibits at the most important international trade exhibitions in order to expand into new markets. We have 20 national and international patents and in excess of 200 of our products have quality approvals and certifications such as FM, UL, AENOR, VDS, LPCB and ANPI. Our products, equipment and systems are present in Spain’s most emblematic projects: INDUSTRY… THE ARTS…COMMUNICATIONS…TOURISM…THE ECONOMY…HEALTHCARE…EDUCATION…. We have invested heavily in leading edge production facilities, from the first production facilities of Ribo in 1963 to our …
Video Rating: 0 / 5

benefits of a Bench Top Injection Machine
Video Rating: 5 / 5

Very technical testing of an injection moulded plastic lens for a security device. This one is a polymer that failed. We have another video of a polymer that passed the test. We actually pay the man with the lump hammer, I’m sure that many would do it for free.

MAC VIII Controller
Video Rating: 0 / 5

this is a very fast machine… look at this…!

Production of DC powercord, productivity 960pc/hr, double injection for plug and SR molding at the same time, this unique design save labors , production time and machine energy.
Video Rating: 0 / 5

www.mhiinj.com MEII 500 TON All Electric Injection Molding Machine

Automated unloading of injection molding machine using KUKA robots. More information at www.kukarobotics.com.
Video Rating: 4 / 5

Dyna-Purge instructional video on the proper purging procedure for shutdown and start-up in injection molding machine with cold runners
Video Rating: 0 / 5