Global Polytec Ltd.,Part.

Posts Tagged ‘machine’

Integrated machine vision system for the automated inspection of a medical device. The machine is a stand alone unit which interfaces with the output from an injection moulding machine. The parts fall from the main out-feed hopper unit into the vision system bowl feed directly, this allows the parts to be inspected immediately following manufacture for defects. Our customer is a blue chip manufacturer of syringe devices into the medical devices and pharmaceutical industry – this component is part of the internal sub-assembly which forms the guts of the main product. The vision system completes a 360 degree inspection of the surface of the product to confirm it has formed correctly in the mould. Our NeuroCheck machine vision system utilises 24bit color image processing functionality to identify if the central portion of the mould is formed correctly via color matching. The products are presented to the vision system cameras via a small dial plate with the products exiting via a small chute if they pass the inspection process. Upon a failure the products fall into a locked box for collection later in the shift. The complete quality control machine is validated to GAMP and FDA standards for medical device manufacture. Due to the confidential nature of the product the video is limited in what can be shown. Further case studies and information can be found on our website at www.industrialvision.co.uk

This video is an excerpt from our Efficient Molding Setting Course – Lesson 1. This course provides basic procedures on how to efficiently set up a mold, troubleshoot mold problems, and properly remove and prepare a mold for storage. Paulson Training Programs – Complete Training Solutions for the Plastics Industry. Visit www.paulsontraining.com for state-of-art plastics training, including interactive CD-ROM and online training.

Injection molding machine demonstrating an 18 gram shot through 4 valve gates of an integrated hot manifold. Machines operate using an entirely different process than conventional injection molding machines. This leads to the small size, modest power requirements (less than 1.5kw/hrs of 220v single phase), instant start-up (no purging) and no experience required to operate it and compete globally on cost. Email rf7106@yahoo.com for cost and information.
Video Rating: 5 / 5

THIEME Corporation, St. Charles, IL. www.thieme-us.com. Basic Reaction Injection Molding Operation showing rigid light density foam encapsulation of metal inserts for an automotive application (EA knee bolster). Use of robot technology and several endforms are used. The video shows the basic premise of RIM polyurethane foam molding. We specialize in large format RIM molding and have capabiliy to make single shot parts up to 75 lbs in a single shot (or 6′ x 6′ x 2′). With our higher density foam systems, such as Prism, Bayflex or Baydur products, this is an excellent process for medical device enclosures, analytical housings and structural parts needing low annual volume production (200-20000 parts per year). This video shows an automotive part that is mid to high volume in annual use (1000-1000000 parts per year). Learn more about our large format part molding, multi-wall thickness molding materials and impact RIM materials, write Mike at our E-mail address of: my@thieme-us.com or call Michael Young 248-628-2930. Ask about our free “On-site” design workshops for RIM & PUR. See more at: www.thieme-products.com

This is a CAD model that show you the main elements involved in the injection molding process. I really hope that help you to figure out better how it works…. regards. Note: this video has been posted only for educational purposes.

Electric molding machines now account for over 50% of new machine sales. There are several reasons for their popularity; more precise control, lower electricity consumption and potentially faster cycles are among the reasons. But along with these and other advantages are potential problems. These machines require an understanding of this new technology by the operating personnel to gain the benefits and avoid very expensive mistakes. In short, they require more knowledgeable personnel at all levels. Now available, Paulson offers a new three-lesson Electric Injection Molding Machine course. This new course integrates into the Paulson 15 lesson Practical Injection Molding training course. Molders who already have the 15 lesson course and are interested in Electric molding machines will want to integrate this new course into their training program. Others may just want to start out with just the All-Electric course. For a limited time, those customers who buy the complete Practical Injection Molding course, Paulson will include the Electric Molding Machine course at no extra cost.
Video Rating: 5 / 5

Meccanoplastica Series Jet Blow Moulding Machine. More Info: www.meccanoplastica.com.

The latest technology innovation from ZCorporation. Build durable plastic parts that rival injection molding’s accuracy, material properties, detail and surface finish. Learn more at www.AnvilPrototype.com

English: Plastic part CNC milling (as test before aluminium milling). Česky: CNC frézování plastového dílu (jako test před frézováním do hliníku).
Video Rating: 0 / 5

Fanuc S2000i 50A injection machine www.esta-tech.com

[Products] China Plastic Production, Extruder, Mixer, Auxiliary Machine Manufacturer [Company] Zhangjiagang Gerui Science & Technology Development Co., Ltd. is a professional comprehensive plastics machinery manufacturer which collects guide taking researching, developing and manufacturing together. The company adhere to taking markets as its guide taking science and technology as its leading, taking the quality as its mainline and taking service as its guarantee. [Source] www.made-in-china.com
Video Rating: 0 / 5

Category:Injection Molding Machines Sub-Category:Horizontal 501+ Tons Description:550 Ton, 145.4 oz Injection Molding Machine Manufacturer:Husky Model:LX500 RS100/85 Year:1997 Features:Husky | Model #: LX500 RS100/85 | Tonnage: 550 Tons | Shot Size: 145.4 oz | Platen Size: 50″ x 53″ | Distance Between Tie Bars: 36.2″ x 36.2″ | Min/Max Daylight: 26″/29.5″ | Hydraulic Knockout | Control: Siemens | Voltage: 460v | Dims: 8′ x 36′ | Weight: 76300 lbs |
Video Rating: 5 / 5

Costruzione macchine iniezione-soffiaggio e stampi per la produzione di vasetti / bottiglie in plastica. Manufacturing of injection-blow moulding and moulds for the production of plastic jars / bottles. Procrea srl Via Leonardo da Vinci , n°12/14 24060 Carobbio degli Angeli ( Bergamo ) – Italy Telefono (++39) 035.951.307 Telefax (++39) 035.953.377 Sito : www.procrea.it E-mail : info@procrea.it